VTC-LP654968LT-1S2P 3.7V 6200mAh Li-ion Polymer Battery Pack for Portable monitoring devices, Industrial handheld terminals, Portable test instruments
| Parameter | Specification |
|---|---|
| Model | VTC-LP654968LT-1S2P |
| Battery Type | Li-ion Polymer Rechargeable battery pack |
| Nominal Voltage | 3.7V |
| Nominal Capacity | 6200mAh, 0.2C discharge |
| Pack Weight | Approx. 118g |
| Pack Initial Impedance | ≤120mΩ, measured at 3.7V AC 1KHz |
| Standard Charging Method | 0.2C CC charge to 4.2V, then CV charge until current declines to 0.01C |
| Standard Charging Time | 6~7 hours |
| Rapid Charging Time | 2.5 hours |
| Pack Dimensions | Thickness max. 13.4mm; width max. 50.0mm; height max. 70.0mm |
| Connector | JST/XHP-3, PA6, UL94V-0, natural white |
| Protection IC | S8261DAI-M6T1U |
| MOSFET | DP8205, 2 pcs |
| Cycle Life | Not less than 600 cycles to 80% of rated capacity under specified 0.2C test conditions |
654968LT-1S2P is a 3.7V 6200mAh Li-ion polymer battery pack for Industrial handheld terminals, Smart security panels, IoT gateway backup power
The VTC-LP654968LT-1S2P is a 3.7V 6200mAh Li-ion polymer battery pack designed with a 1S2P cell structure for rechargeable equipment that needs higher capacity in a compact pouch-pack format. According to the product specification, the pack uses two VTC-LP654968LT 3100mAh lithium polymer cells, provides 6200mAh nominal capacity and 6300mAh rated capacity at 0.2C discharge, charges to 4.2V, and discharges to a 3.0V cut-off voltage. Standard charge and discharge current are both 1240mA, with rapid charge current and maximum discharge current listed as 3100mA. The finished pack size is max. 13.4mm thickness, 50.0mm width and 70.0mm height, with 80+/-5mm wire length, UL1007 22AWG wires, JST/XHP-3 connector, S8261DAI-M6T1U protection IC and dual DP8205 MOSFETs. The datasheet also lists charging operation from 0 to 45 degC and discharging operation from -40 to 65 degC under the specified current limits.
VTCBATT can support factory-direct supply, sample development, connector and wire matching, protection circuit configuration, custom labeling, OEM/ODM battery pack assembly and wholesale batch production for equipment manufacturers and battery distributors.
6200mah Flat Pack Capacity
Low Temperature Discharge Range
OEM Connector Assembly
protected pack design
Full Certification & Extended Warranty
VTCBATT LiPo batteries meet global certifications including CB, CE, UL, and UN38.3, and offer a 14-month warranty—two months longer than standard—to maximize customer confidence and profit.
VTCBATT lipo battery passed all the major global certifications, such as CB, CE, EN61000, IEC62133, MSDS, UN38.3, ROHS, UL, BIS, KC Certification, which makes your product more competitive.
Compared to a normal 12-month warranty, VTCBATT lipo batteries have 14-month warranty and two extra months for shipping and customs clearance ,which ensure the customer’s profit.
VTCBATT Production and Service
VTCBATT not only focuses on customized design and excellent service to meet the diverse demands of different customers, but also devotes itself to precise and standardized manufacturing in every process to ensure the highest-quality batteries. Meanwhile, VTCBATT will provide comprehensive support from pre-sales to after-sales, focusing on customers’ feedback to establish long-term and win-win cooperation. VTCBATT professional sales and technical engineer teams will be your best custom battery experts to assist with reliable and fast services at any time.
From the raw materials mixing to the cell test, VTCBATT adopts an automatic manufacturing process to maximize production efficiency and enhance the batteries quality, safety, and reliability. The entire manufacturing process is monitored and 100% tested before flowing to the next procedure to ensure zero defects before delivery.
Over the past 20 years, VTCBATT has built strong partnerships with customers in more than 50 countries worldwide. With reliable quality, responsive service, and tailored battery solutions, we have earned the trust of our clients—many of whom have maintained long-term cooperation and lasting friendships with us for over a decade. Together, we continue to grow and move forward toward a brighter future.
Application for 3.7V 6200mAh lithium polymer battery pack
This 3.7V 6200mAh lithium polymer battery pack is suitable for rechargeable devices that require a flat pouch battery, moderate current capability and reliable pack-level protection, such as industrial handheld terminals, barcode scanners, portable test instruments, IoT gateways, security panels, access control devices, smart lockers, POS terminals, wireless monitoring equipment and compact backup power modules. The 1S2P structure provides higher capacity than a single 3100mAh cell while keeping the pack in a rectangular 13.4mm max. thickness format, and the JST/XHP-3 connector with 80+/-5mm wires makes it practical for enclosure integration and prototype validation. For application-specific projects, VTCBATT can adjust wire length, connector type, plug orientation, protection circuit design, labeling, insulation and sample testing according to the customer’s device layout and current requirements. The product is positioned for factory-direct lithium battery pack supply, custom lithium polymer battery pack projects, OEM/ODM assembly, stable batch production and battery wholesale service for distributors, brand owners and equipment manufacturers.
