High Discharge/High Power 8S 29.6V 8000mAh Li-Po Battery for drone for logistics, Swift-Blade Indoor Nano Helicopter, Custom 7-inch Long Range Explorer
| Capacity (milliamps – amp hours) | 8000mAh – 8Ah |
| Nominal voltage | 8S 29.6v |
| Maximum voltage | 33.6v |
| Minimum voltage | 24v |
| Recommended landing voltage(air) | 28v |
| Recommended cut-off voltage(ground) | 25.6v |
| Chemistry | Lithium-Polymer(LiPo) |
| Maximum continuous discharge | 180 amps |
| Maximum charge current | 40 amps |
| Watt hours | 236.8 Wh |
| Energy density | 178 Wh/kg |
| Main lead length(custom lengths available) | 152mm |
| Balance lead length(custom lengths available) | 152mm |
| Length | 140mm |
| Width | 52mm |
| Height | 88mm |
| Weight | 1302g |
High Discharge/High Power 8S 29.6V 8000mAh Li-Po Battery for drone for logistics, Swift-Blade Indoor Nano Helicopter, Custom 7-inch Long Range Explorer
High Discharge / High Power 8S 29.6V 8000mAh Li-Po Battery is a type of lithium polymer battery in 8S series, featuring 29.6V nominal voltage and 8000mAh capacity. It is specially designed for high-end UAV and long-range aerial platforms that demand sustained high power output, extended flight time, and excellent voltage stability.
Composed of superior raw materials, lithium cobalt and soft aluminum film, the 29.6V 8S 8000mAh battery is lightweight, compact, and delivers high energy density. The optimized pouch structure enhances thermal performance and structural reliability, supporting continuous operation in complex flight environments.
Featuring low internal resistance and 20C–120C high burst current, the 8S 8000mAh Li-Po battery can discharge maximum power instantaneously without rapid temperature increase. This ensures strong lift capability, fast throttle response, and stable power supply during heavy payload transport and long-distance cruising. To ensure ultimate safety, its internal is integrated with a protection circuit board (battery PCB) to protect against overcharge, overdischarge, overcurrent, over-temperature, and short circuit in 1–3ms fast response. The whole Li-Po battery production process conducts in high-automation production lines and medical-grade dust-free workshops with strict humidity control, supported by an MES system. It always delivers stable energy output and steady voltage to power logistics drones, Swift-Blade indoor nano helicopters, and custom 7-inch long-range explorer UAVs.
Full Certification & Extended Warranty
VTCBATT LiPo batteries meet global certifications including CB, CE, UL, and UN38.3, and offer a 14-month warranty—two months longer than standard—to maximize customer confidence and profit.
CertificationVTCBATT lithium polymer batteries have passed numerous important international certifications, including UL1642, IEC62133, UN38.3, CE, ROHS, BIS and EU2024/1542, CE, ROHS, REACH, and KC certifications.
WarrantyVTCBATT LiPo batteries come with a 14-month warranty, 2 months longer than the standard 12-month warranty, providing extra coverage for shipping and customs clearance. This ensures customer confidence.
CustomizationDifferent sizes,capacities, connectors, discharge rates,and cases. Just inform us of your specific requirement, and our professional engineers can provide you with the customized lipo battery proposal.
Flexible order quantity to support prototype testing and mass production.
Our technical and sales teams reply to your inquiry within 6 hours.
Test our lithium battery quality and performance before placing bulk orders.
Batteries certified to UL, CE, UN38.3, MSDS, ROHS, IEC62133, and more global standards.
High Burst Current
The High Power 8S 29.6V 8000mAh battery features 20C-120C high burst current, providing instantaneous surge current to power the motor in the drones,helicopters,RC toys strongly. The burst current can be customized as per your power demand exactly.
Compact Power
Featuring ultra high energy density 290Wh/Kg and high voltage at 3.8V/3.95V/4.35V,the High Power 8S 29.6V 8000mAh battery can maintain the maximum power in the most compact sizw. It makes the drones,helicopters,RC toys much more lightweight and powerful.
Thermal Efficiency
The Optimized internal resistance(IR) stays in ultra low level to allow high discharge rate peak load without much heat generation, optimizing the performance in the maximum and extending the overall cycle life in the utmost.
LiPo Battery Advantage
Based on 0.5C/1C cycling, the VTCBATT lipo battery can maintain over 80% capacity after 500 cycles and totally reach 1000 times cycle life.
VTCBATT Lipo battery can be discharged from -20℃ to 60℃.
This wide temperature range performance enables the battery to operate in many conditions.
After 30-day and 60-day storage, there is slight 1%-2% slight voltage decrease under 50% SOC at 25°C.
Why Choose VTCBATT?
VTCBATT not only focuses on customised design and excellent service to meet the diverse requirements of different customers, but also devotes its efforts to precise and standardised manufacturing in every process to ensure the highest quality of batteries. At the same time, VTCBATT provides comprehensive support from pre-sales to after-sales service, focusing on customer feedback in order to build long-term and mutually beneficial cooperation. VTCBATT’s professional sales and technical teams are the best experts in the field of customised batteries for customers and are always ready to provide reliable and prompt services.
From mixing raw materials to testing cells, VTCBATT relies on a mechanised manufacturing process to maximise production efficiency and improve the quality, safety and reliability of its batteries. The entire manufacturing process is monitored and 100% inspected before proceeding to the next step to ensure that there are no defects prior to delivery.
Over the past 20 years, VTCBATT has built strong partnerships with customers in more than 50 countries worldwide. With reliable quality, responsive service, and tailored battery solutions, we have earned the trust of our clients—many of whom have maintained long-term cooperation and lasting friendships with us for over a decade. Together, we continue to grow and move forward toward a brighter future.
Application for 8S 29.6V 8000mAh lipo battery
The VTCBATT High Power 8S 29.6V 8000mAh polymer lithium-ion battery is widely used in portable electronics and smart devices that require high energy density and stable power output. With a slim pouch design, it is ideal for drone for logistics, Swift-Blade Indoor Nano Helicopter, Custom 7-inch Long Range Explorer. This battery supports customized dimensions, voltage, and protection circuits to match specific application needs. Featuring low internal resistance, long cycle life, and reliable safety performance, the VTCBATT 29.6v 8000mAh Li-polymer battery ensures efficient operation, extended runtime, and dependable performance for both consumer and industrial applications.
Provides lightweight high-voltage power for stable hovering, agile indoor maneuvering, and extended compact helicopter runtime.
Supports heavy payload transportation with stable discharge performance and reliable long-duration autonomous delivery operation capability.
High-capacity LiPo battery enables efficient long-range FPV flights with stable voltage during extended exploration missions.
Delivers reliable continuous output for demanding outdoor aerial navigation, endurance flying, and high-efficiency cruising performance.
Smooth and stable power delivery improves cinematic indoor flight control, precise maneuvering, and professional video recording stability.
High discharge capability supports rapid acceleration, aerial flips, and aggressive stunt flying responsiveness during operation.
Provides stable voltage output for smooth aerial filming, longer flight endurance, and reliable camera system operation.
Supplies strong acceleration power and long runtime for high-speed RC racing, drifting, and off-road driving applications.
