CR17505 Battery Information

1. Product and Manufacturer Identification

This section identifies the CR17505 battery model, its main electrical specifications, and the manufacturer information used for product reference and customer documentation.

2. Battery Chemistry and Safety Summary

The CR17505 is a 3.0 V non-rechargeable lithium manganese dioxide primary battery. It is designed for stable voltage output, long storage life, and reliable primary power in suitable equipment.

Battery Chemistry & Material Information

Battery Chemistry: Lithium Manganese Dioxide (Li-MnO₂)

Battery Type: Non-rechargeable primary lithium battery

Nominal Voltage: 3.0 V

Key Active Materials: Lithium (Li) and manganese-based materials

Substance Information

The CR17505 contains 1,2-dimethoxyethane (EGDME), CAS No. 110-71-4, at a reported concentration of 3.737%.

Critical Raw Materials

The product information identifies the following critical raw materials for the CR17505:

• Aluminium (Al)
• Lithium (Li)
• Manganese (Mn)

Safety and Compliance Notes

• Usable extinguishing agent: Class D fire extinguisher.
• Non-rechargeable battery: do not recharge.
• Separate collection is required where applicable under local battery recycling and waste regulations.
• Do not short-circuit, crush, disassemble, heat, or dispose of the battery in fire.
• Use only in equipment designed for this battery type and voltage.
• Keep batteries away from children and avoid direct contact with leaked material.
• For detailed hazards, first-aid measures, and emergency response information, refer to the SDS / MSDS.

Material and substance information shown on this page is based on the applicable product documentation and may be updated where required by product specifications or applicable regulatory requirements.

3. Handling Storage and Disposal

Handle batteries carefully to prevent mechanical damage, accidental short circuits, reverse installation, or exposure to excessive heat and moisture.

• Store in a cool, dry, well-ventilated area away from direct sunlight, metal objects, strong oxidizing agents, and heat sources.
• Keep batteries in original packaging or insulated containers before use.
• Do not mix new and used batteries or different battery chemistries in the same device.
• Dispose of used batteries according to local battery recycling and waste regulations. Do not dispose of lithium batteries with ordinary household waste where separate collection is required.

4. Transport Information

CR17505 lithium metal batteries may be subject to international transport regulations. Shipment requirements depend on battery configuration, quantity, packaging, transport mode, and destination market.

• UN38.3 test documentation and test summary should be checked before shipment.
• Air, sea, road, and courier shipments may require specific packaging, labeling, and documentation.
• Confirm the applicable transport requirements with the carrier, forwarder, or compliance team before shipping.

5. Compliance and Regulatory Information

The following table summarizes the document and regulatory information normally requested for the CR17505 battery information page.

6. Downloads and Contact

Download links should be connected to the latest controlled VTCBATT documents for the CR17505 model, including datasheet, SDS / MSDS, UN38.3 documentation, transport information, and applicable regulatory files.

What should I do if I cannot find my battery model or compliance document?

Check the exact model number printed on the battery label and search the VTCBATT Battery Information Database again. If the model or required document is not available, contact VTCBATT and provide the battery model, label photo, required document, and destination market. VTCBATT can then confirm the applicable product information and available compliance documentation.

Website: www.vtcbatt.com