x
Send Your Inquiry Today
  • CP752843 3.0V 2000mAh Li-MnO2 primary lithium battery, front view
  • CP752843 Li-MnO2 primary cell showing tab construction
  • CP752843 3.0V 2000mAh Li-MnO2 primary lithium battery, front view
  • CP752843 Li-MnO2 primary cell showing tab construction

CP752843 3.0V 2000mAh Li-MnO₂ Primary Lithium Battery

3.0 V Primary Cell with Nickel-Plated Tabs

ParameterSpecification
ModelCP752843-2000mAh
Battery TypePrimary lithium manganese dioxide (Li-MnO₂), single cell
Nominal Voltage3.0 V
Nominal Capacity2000 mAh (at 5 mA to 2.0 V, 23°C)
Maximum Continuous Discharge Current800 mA (specified to 50% nominal capacity at 23 ± 2°C, 2.0 V cutoff)
Maximum Pulse Discharge Current1000 mA (3 s on / 27 s off, specified to 50% nominal capacity)
Discharge Cut-off Voltage2.0 V
Operating Temperature−40°C to +65°C
Maximum Dimensions45 × 30 × 7.5 mm
Tab / WeightStainless steel, nickel-plated tabs / approx. 14.5 g

CP752843 3.0V 2000mAh Li-MnO₂ Primary Cell

CP752843 is a single-cell, non-rechargeable Li-MnO₂ battery rated at 3.0 V and 2000 mAh. It uses stainless-steel, nickel-plated tabs and has maximum dimensions of 45 × 30 × 7.5 mm. The specified maximum continuous discharge is 800 mA and maximum pulse discharge is 1000 mA under the datasheet test conditions. Actual capacity and pulse capability depend on current profile, temperature, cell history and cutoff voltage; validate in the end device.

Compact Single-Cell Format

Compact form factor — CP752843 has maximum dimensions of 45 × 30 × 7.5 mm. Allow clearance for tabs and assembly tolerances.

Compact Single-Cell Format — CP752843 3.0V 2000mAh Li-MnO2 primary battery
Nickel-Plated Tab Terminals — CP752843 3.0V 2000mAh Li-MnO2 primary battery

Nickel-Plated Tab Terminals

Terminal detail — stainless-steel tabs with nickel plating, as specified for integration into equipment designed for tab connections.

Up to 800 mA Continuous Discharge

The datasheet specifies up to 800 mA continuous discharge under its stated 23 ± 2°C, 2.0 V cutoff test condition. Validate the actual load profile.

Up to 800 mA Continuous Discharge — CP752843 3.0V 2000mAh Li-MnO2 primary battery
−40°C to +65°C Operating Range — CP752843 3.0V 2000mAh Li-MnO2 primary battery

−40°C to +65°C Operating Range

Specified operating range is −40°C to +65°C. Available capacity and pulse response vary with temperature; qualify the cell in the end device.

Full Certification & Extended Warranty

Certification coverage and warranty terms must be confirmed for this exact CP752843 configuration and destination market. The available datasheet does not list model-specific certificates or a warranty duration. Request applicable compliance documents and written warranty terms before qualification or purchase.

Product-Specific Certifications

The available CP752843 datasheet specifies cell performance but does not list model-specific certificates. Ask VTC POWER which compliance documents apply to this cell and destination market.

Written Warranty Terms

The source datasheet does not state a warranty duration. Confirm warranty scope, start date and exclusions in the quotation or purchase agreement.

Get an Instant Quote
MANUFACTURING · ENGINEERING · QUALITY

VTCBATT Production and Service

VTCBATT combines standardized manufacturing with customer-focused battery engineering to support OEM/ODM projects. VTC POWER CO., LTD. manufactures CP752843 at its Huizhou production site in Zhongkai Industrial Park, China. From application review and sample evaluation through production and after-sales service, the team works with customers to align battery requirements with their products.

A Benchmark of Automatic Lithium Polymer Battery Manufacturing Line - VTCBATT Modern Facility
Modern Manufacturing

Automated production processes, monitored manufacturing steps and cell testing help maintain consistent quality from material preparation through finished-cell inspection. Specific checks are applied throughout production to support reliable battery performance.

Engineering and Customer Service

VTCBATT technical and sales teams support customers from initial application review through after-sales service. Engineers work with OEM/ODM customers to evaluate voltage, discharge profile, dimensions, terminals and operating conditions for a suitable battery proposal.

APPLICATIONS

Potential Applications for CP752843 3.0V Li-MnO₂ Battery

Application candidates only. Confirm voltage, load profile, cutoff, size and operating temperature in the end device.

Smart Electricity Meters application scene for CP752843 3.0V Li-MnO2 primary battery
Smart Electricity Meters

Meter installations where the duty cycle, 3.0 V input and 2.0 V cutoff suit the cell.

Wireless Security Alarm Panels application scene for CP752843 3.0V Li-MnO2 primary battery
Wireless Security Sensors

Validate standby load and radio-transmission pulse current against datasheet limits.

Industrial Controller Memory Backup application scene for CP752843 3.0V Li-MnO2 primary battery
Industrial Controller Memory Backup

For memory-retention circuits designed for a 3.0 V primary cell with reverse charging prevented.

Remote Environmental Sensors application scene for CP752843 3.0V Li-MnO2 primary battery
Remote Environmental Data Loggers

Check cold-weather capacity and reporting interval for low-power monitoring.

Asset Tracking Tags application scene for CP752843 3.0V Li-MnO2 primary battery
Asset Tracking Tags

Evaluate after validating peak transmit current, duty cycle and runtime.

Medical Measurement Instruments application scene for CP752843 3.0V Li-MnO2 primary battery
Portable Medical Instruments

Potential fit for qualified devices; confirm applicable product-level regulatory and safety requirements.

Smart Agriculture Sensor Nodes application scene for CP752843 3.0V Li-MnO2 primary battery
Smart Agriculture Sensor Nodes

For low-power field monitoring within voltage, current and temperature limits.

Emergency Beacons application scene for CP752843 3.0V Li-MnO2 primary battery
Emergency Beacons and Wireless Modules

Validate pulse duration, recovery interval, temperature and end-of-life indication.

VTCBATT · Primary Lithium Battery

CP752843 3.0V 2000mAh Li-MnO₂ Primary Cell

A single-cell Li-MnO₂ battery with nickel-plated tabs, a compact envelope and defined current and temperature limits.

CP752843-2000mAh is a non-rechargeable 3.0 V primary cell rated at 2000 mAh under the datasheet test condition of 5 mA discharge to 2.0 V at 23°C. It is for equipment designed for primary lithium chemistry and loads within the specified limits.

Electrical and Mechanical Specifications

ParameterSpecification
Model / chemistryCP752843-2000mAh / primary Li-MnO₂, single cell
Nominal voltage / capacity3.0 V / 2000 mAh at 5 mA to 2.0 V, 23°C
Maximum continuous discharge800 mA under stated test conditions
Maximum pulse discharge1000 mA, 3 s on / 27 s off under stated test conditions
Cutoff voltage2.0 V
Maximum size / mass45 × 30 × 7.5 mm / approx. 14.5 g
TabsStainless steel, nickel plated
Operating temperature−40°C to +65°C

Voltage and Installation Fit

The maximum cell envelope is 45 × 30 × 7.5 mm. Allow extra clearance for tab bends, insulation, holders and assembly tolerances. This 3.0 V primary cell is not a drop-in replacement for a rechargeable 3.7 V Li-ion/LiPo battery. The end device must prevent charging or reverse current into the cell.

The 2000 mAh rating comes from a low-rate test. Real runtime varies with average and peak load, temperature, device cutoff, storage history and duty cycle. Validate startup and transmit pulses, low-temperature capacity and end-of-life behavior using the actual device load. Do not infer runtime from capacity alone.

Follow the datasheet and local requirements for storage, handling and disposal. Qualify the complete device under its intended operating conditions before production.

Discuss CP752843 application requirements

Is the CP752843 rechargeable?

No. It is a primary, non-rechargeable Li-MnO₂ cell. The end device must prevent charging and reverse current.

Can it replace a 3.7 V LiPo battery?

Do not assume a drop-in replacement. CP752843 is a 3.0 V primary cell with different voltage and charging behavior. Check device operating voltage, cutoff and power electronics.

Will it fit a 45 × 30 × 7.5 mm compartment?

Those are maximum cell dimensions. Allow room for tabs, insulation, holder and assembly tolerances, then confirm the installed fit with a sample.

Does 2000 mAh tell me the device runtime?

Not by itself. Capacity is specified at 5 mA to 2.0 V at 23°C. Runtime also depends on load pulses, temperature, cutoff and storage history. Validate using the real duty cycle.

Can it supply a 1000 mA radio pulse?

The datasheet specifies 1000 mA for 3 seconds followed by 27 seconds off under stated test conditions. Check that pulse width, repetition rate, temperature and voltage sag match your design.

Can it operate in cold or hot environments?

The specified operating range is −40°C to +65°C. Capacity and pulse response vary with temperature, so test startup and usable capacity at the application extremes.

What low-voltage cutoff should my device use?

The datasheet lists 2.0 V discharge cutoff. Set the system threshold to suit the device and validated cell behavior; do not operate below the specified cutoff.

Get an Instant Quote
       
contact

Send Your Inquiry Now

Looking for the perfect battery solution? Our expert engineering team is ready to support you from idea to delivery. Whether you need custom voltage, size, or application-specific design, we’re here to make it happen. Get in touch today and let us power your success—one battery at a time!
Get an Instant Quote

MEET VTCBATT

Meet VTCBATT at electronica 2026.

Bring your battery project to Munich. Meet our team to explore custom lithium and wide temperature battery solutions for your next device.

WHEN
November 10–13, 2026
WHERE
Messe München · Munich, Germany
BOOTH
Hall A5 · 171/2
Plan your visit

Let’s talk batteries. Let’s build what’s next.

Scroll to Top