VTC-LP502035P 3.7V 300mAh 10C High Rate Li-ion Polymer Battery Pack Datasheet Summary
The VTC-LP502035P is a rechargeable high rate lithium-ion polymer battery pack manufactured and supplied by VTC Power Co., Ltd. The source datasheet identifies the pack as a 3.7V 300mAh model using a compact 502035 cell format with protection components, 30+/-3mm wire leads, a JST/PHR-3P connector, and 3000mA maximum discharge current, equivalent to about 10C.
Core Electrical Parameters
The battery is rated at 310mAh with 300mAh nominal capacity and 290mAh minimum capacity under 0.2C discharge. The datasheet lists 4.2V limited charge voltage, 3.0V discharge cut-off voltage, 60mA standard charge current, 300mA rapid charge current, and 3000mA maximum discharge current, supporting a 10C high rate positioning for this 300mAh pack.
| Parameter | Specification |
|---|---|
| Model | VTC-LP502035P |
| Battery Type | Li-ion Polymer Rechargeable Battery Pack |
| Nominal Voltage | 3.7V |
| Nominal Capacity | 300mAh |
| Rated / Minimum Capacity | 310mAh rated; 290mAh minimum |
| Charge / Discharge Limits | 4.2V limited charge voltage; 3.0V cut-off voltage |
| Charge Current | 60mA standard; 300mA rapid |
| Discharge Current | 60mA standard; 3000mA maximum (10C) |
| Pack Structure | 5.3mm max thickness x 20.5mm max width x 37.5mm max height; 30+/-3mm wire; JST/PHR-3P connector |
| Protection Components | R5478N101CD protection IC; 8205 MOSFET; 10K ohm +/-1%, B3435 NTC |
Pack Size and Structure
The cell drawing gives a 5.0mm maximum initial thickness, 20.0mm maximum width, and 35.0mm maximum height. The completed pack drawing lists 5.3mm max thickness x 20.5mm max width x 37.5mm max height and 30+/-3mm wire length. The pack list includes one lithium polymer cell, PCB, three UL1571 24AWG wires, and one JST/PHR-3P connector.
Cell Drawing Dimensions
| Item | Description | Dimension |
|---|---|---|
| A | Cell Tab Length | 4~8 mm |
| B | Cell Tab Pitch | 6+/-1.5 mm |
| C | Cell Tab Width | 4+/-0.2 mm |
| D | Cell Top Sealant Length | 4+/-1 mm |
| T | Cell Thickness max. | 5.0 mm initial; 5.4 mm after 500 cycle life |
| W | Cell Width max. | 20.0 mm |
| H | Cell Height max. | 35.0 mm |
Battery Pack Drawing Dimensions
| Item | Description | Dimension |
|---|---|---|
| T | Battery Pack Thickness max. | 5.3 mm |
| W | Battery Pack Width max. | 20.5 mm |
| H | Battery Pack Height max. | 37.5 mm |
| L | Wire Length | 30+/-3 mm |
Protection Circuit and Temperature Feedback
The PCBA parts list specifies a R5478N101CD protection IC, 8205 MOSFET, and 10K ohm +/-1%, B3435 NTC. Protection settings include over-charge, over-discharge, over-current, and short-circuit protection values in the datasheet, while the NTC gives device designers a supported path for temperature-aware pack integration.
Operating Range and Life Test
The operating temperature range is 10~45 degC for charging and -20~60 degC for discharging. Cycle life is specified as not less than 600 cycles under the defined 0.2C charge/discharge test until capacity is reduced to 80% of rated capacity. Self-discharge retention is listed as not less than 85% of initial capacity after 28 days at 20+/-5 degC.
Application Fit
This compact protected lithium polymer battery pack is suitable for small rechargeable electronics, IoT modules, smart sensors, handheld meters, wearable modules, and compact tracking equipment where a slim pack, connectorized leads, protection circuit, and NTC support are required.
VTCBATT OEM/ODM Supply Notes
VTCBATT can support sample development, wire and connector matching, NTC configuration, protection circuit review, private labeling, and batch production for equipment manufacturers, distributors, and battery pack buyers. Technical claims in this article are based on the supplied datasheet and do not add unsupported certification or production-capacity statements.
