VTC602080 3.7V 1000mAh Li-ion Polymer Battery Pack for GPS Trackers, POS Terminals, IoT Sensors
| Parameter | Specification |
|---|---|
| Model | VTC602080 |
| Battery Type | Rechargeable Li-ion polymer battery pack |
| Nominal Voltage | 3.7V |
| Nominal Capacity | 1000mAh @ 0.2C5A |
| Charge Voltage Max. | 4.2V |
| Charge / Discharge Current | Standard charge/discharge: 0.2C5A; max charge: 1.0C5A; max discharge: 2.0C5A |
| Discharge Cut-off Voltage | 3.0V |
| Pack Dimension | T: 6.2mm max, W: 22.0mm max, L: 82.0mm max |
| Lead Wire / PCM | 50±2mm UL1571 26AWG red/yellow/black leads; PCM 15*4.5*0.6mm |
| Operating Temperature | Charge: 0°C to +45°C; discharge: -20°C to +60°C |
VTC602080 3.7V 1000mAh Li-ion Polymer Battery Pack for GPS Trackers, POS Terminals, IoT Sensors
The VTC602080 is a rechargeable Li-ion polymer battery pack rated at 3.7V and 1000mAh, designed for compact electronics that need a slim 6.2mm max profile with stable protected output. The datasheet specifies 4.2V maximum charge voltage, 3.0V discharge cut-off voltage, 0.2C standard charge/discharge, 1.0C maximum charge, 2.0C maximum discharge, and a pack size of 6.2mm max thickness, 22.0mm max width, and 82.0mm max length. It uses a PCM with S-8261DAA protection IC and S8205A MOSFET, plus 50±2mm UL1571 26AWG red/yellow/black lead wires. VTCBATT supports factory supply, connector and wire customization, OEM/ODM pack development, wholesale orders, and sample-to-batch production for equipment manufacturers and battery distributors.
602080 1000mAh 3.7V Li-ion Polymer Rechargeable Battery
| Item | Datasheet Value |
|---|---|
| Pack thickness | 6.2mm max |
| Cell thickness | 6.0mm max |
| Pack width | 22.0mm max |
| Pack length | 82.0mm max |
| Lead wire length | 50±2mm |
| Lead wire model | UL1571 26AWG, red/yellow/black |
1000mAh Compact Power
OEM Wire Customization Ready
The datasheet shows 50±2mm UL1571 26AWG red/yellow/black lead wires, giving a clear starting point for assembly design. VTCBATT can support connector matching, wire length changes, label printing, protection-board options, and OEM/ODM batch supply based on the customer device layout.
Protected Rechargeable Output
Slim 602080 Pack Design
Full Certification & Extended Warranty
VTCBATT 3.7V 1000mAh 602080 -40℃ Low temperature LiPo batteries meet global certifications including CB, CE, UL, and UN38.3, and offer a 14-month warranty—two months longer than standard—to maximize customer confidence and profit.
VTCBATT 3.7V 1000mAh 602080 -40℃ Low temperature lipo battery passed all the major global certifications, such as CB, CE, EN61000, IEC62133, MSDS, UN38.3, ROHS, UL, BIS, KC Certification, which makes your product more competitive.
Compared to a normal 12-month warranty, VTCBATT 3.7V 1000mAh 602080 -40℃ Low temperature lipo batteries have 14-month warranty and two extra months for shipping and customs clearance ,which ensure the customer’s profit.
VTCBATT Production and Service
From the raw materials production to the final battery assembly, VTCBATT adopts automatic production and strict quality control to ensure the highest quality grade in battery safety, reliability, and stability.
Focusing on customized battery manufacturing for 20 years, VTCBATT established long-term and win-win cooperation with worldwide customers by offering prompt pre-sales proposals and excellent after-sales services in long-term value.
From the raw materials mixing to the cell test, VTCBATT adopts an automatic manufacturing process to maximize production efficiency and enhance the batteries quality, safety, and reliability. The entire manufacturing process is monitored and 100% tested before flowing to the next procedure to ensure zero defects before delivery.
Over the past 20 years, VTCBATT has built strong partnerships with customers in more than 50 countries worldwide. With reliable quality, responsive service, and tailored battery solutions, we have earned the trust of our clients—many of whom have maintained long-term cooperation and lasting friendships with us for over a decade. Together, we continue to grow and move forward toward a brighter future.
LP602080 3.7V 1000mAh Li-ion Polymer Battery
This 3.7V 1000mAh lithium polymer battery pack is suitable for portable POS terminals, barcode scanners, GPS trackers, IoT sensor modules, smart home controllers, compact monitoring devices, and handheld industrial instruments where a thin rechargeable pack and protected three-wire output are required. The 602080 format gives device designers a long, narrow battery footprint, while the PCM and lead-wire structure make it practical for enclosure assembly and connector matching. VTCBATT can adjust wire length, connector type, NTC or signal-wire configuration, protection circuit requirements, label content, and packaging for application-specific projects, with factory-direct battery wholesale and OEM/ODM support for brands, integrators, and distributors.
Related Product
VTC602080 3.7V 1000mAh Li-ion Polymer Battery Pack Datasheet Summary
The source PDF describes a rechargeable lithium ion polymer battery produced by VTC Power. The pack model is VTC602080 with 1000mAh nominal capacity, 3.7V nominal voltage, a 4.2V maximum charge voltage, and a protected pack structure suitable for compact rechargeable electronics.
Core Electrical Parameters
| Parameter | Specification |
|---|---|
| Model | VTC602080 |
| Battery Type | Rechargeable Li-ion polymer battery pack |
| Nominal Voltage | 3.7V |
| Nominal Capacity | 1000mAh @ 0.2C5A |
| Charge Voltage Max. | 4.2V |
| Charge / Discharge Current | Standard charge/discharge: 0.2C5A; max charge: 1.0C5A; max discharge: 2.0C5A |
| Discharge Cut-off Voltage | 3.0V |
| Pack Dimension | T: 6.2mm max, W: 22.0mm max, L: 82.0mm max |
| Lead Wire / PCM | 50±2mm UL1571 26AWG red/yellow/black leads; PCM 15*4.5*0.6mm |
| Operating Temperature | Charge: 0°C to +45°C; discharge: -20°C to +60°C |
Pack Size and Wire Structure
The pack drawing specifies 6.2mm maximum thickness, 22.0mm maximum width, and 82.0mm maximum length. The lead wire length is 50±2mm, using UL1571 26AWG red, yellow, and black wires.
Protection Circuit
The BOM lists an S-8261DAA protection IC and S8205A MOSFET. The electrical characteristics section includes over-charge, over-discharge, over-current, and short-circuit protection data, supporting rechargeable battery pack integration.
Operating Conditions
The datasheet states charge operation from 0°C to +45°C and discharge operation from -20°C to +60°C. For storage, the document recommends maintaining cell voltage between 3.75V and 3.95V during long-period storage.
Datasheet Text Details
Mechanical Dimensions
| Item | Datasheet Value |
|---|---|
| Pack thickness | 6.2mm max |
| Cell thickness | 6.0mm max |
| Pack width | 22.0mm max |
| Pack length | 82.0mm max |
| Lead wire length | 50±2mm |
| Lead wire model | UL1571 26AWG, red/yellow/black |
Cell Drawing Values
The single-cell drawing lists a 6.0mm max thickness, 20.0mm max width, 80.0mm max length, 40.0mm max L2 length, 5-10mm L3 length, 70.0mm max L4 length, 9±1.5mm center distance, and 2±0.2mm tab width.
Protection IC and PCB BOM
| Location | Part | Specification |
|---|---|---|
| U1 | Protection IC | S-8261DAA, SOT-23-6 |
| U2 | MOSFET | S8205A, SOT-23-6 |
| PCB | Protection board | 15 x 4.5 x 0.6mm |
Protection Thresholds
The protection circuit section lists over-charge detection at 4.280±0.020V with 0.7-1.3s delay, over-charge release at 4.180±0.05V, over-discharge detection at 3.00±0.05V, over-discharge release at 3.00±0.1V, over-current detection voltage at 0.08±0.010V, over-current detection current at 1.2-2.5A, and short-circuit release after the external short circuit is removed.
Application Fit
- Portable POS terminals, barcode scanners, handheld payment devices
- GPS trackers, asset tracking tags, logistics monitoring modules
- Smart wearable devices, compact health monitors, portable sensor hubs
- Wireless IoT data loggers, environmental sensors, remote telemetry nodes
- Bluetooth audio devices, compact speakers, rechargeable remote controls
- Medical accessory modules, handheld diagnostic accessories, monitoring peripherals
- Industrial handheld meters, inspection instruments, wireless test tools
- Smart home controllers, security sensors, compact backup power modules
VTCBATT Supply Notes
VTCBATT can support OEM/ODM pack design, connector matching, wire length customization, label printing, protection circuit adjustment, sample testing, and factory-direct wholesale supply for compact device manufacturers and battery distributors.
